英语
中文简体
西班牙语
Product Consultation
Your email address will not be published. Required fields are marked *
1. Do not mix ink and solvent ink. Appropriately add water during use, and when it is really necessary to adjust the viscosity or drying speed, add alcohols or esters and other additives in an appropriate amount.
2. Stir well before use and then pour it into the ink tank, and adjust the viscosity with water before use. Unused ones should be covered with packaging barrels, and the ink cannot be volatilized in nature.
3. Before use, you should check various technical indicators, especially whether the hue meets your requirements. If the hue deviation is large, please notify the ink manufacturer to make appropriate adjustments, to avoid disputes between the two parties due to the hue error.
4. During the printing process, due to the volatilization of water, the original viscosity and pH value of ink will be affected. It is necessary to check the viscosity and pH value frequently. When necessary, pure tap water or pH value stabilizer should be appropriately added.
5. The ink remaining on the printing equipment after printing should be rinsed with clean water, and the ink marks on the anilox roller of the printing machine can be easily cleaned with cleaning agents for the next printing service. Get out of the misunderstanding of the use of water based printing ink Not all users of water based printing ink understand the principle of viscosity. Many people will have such a misunderstanding, thinking that the viscosity of the ink is good ink. You can add a lot of water and print more cartons to reduce costs and improve efficiency.
Tel: 0086-571-85192560
E-mail: 
Add: No.599 Baiyunyuan East Road, Tonglu Economic Development Zone, Hangzhou.