Clothing factories often need to use A3 sublimation paper in order to allow the pattern to be attached to the clothes, so they often buy and use this product. But for the factory, it is not that all A3 sublimation paper will be used up at once. Therefore, it is necessary to know how to store the important A3 sublimation paper to avoid problems and cannot be used.
1. Do not store in a humid place
A3 sublimation paper is mainly used in combination with ink, so A3 sublimation paper cannot be stored in a dark and humid place, otherwise, the ink coloring ability will be reduced when it is used later. Moreover, it is prone to a large amount of water vapor when placed in a damp place. In severe cases, the material of the A3 sublimation paper will ablate, so that it cannot be used normally in the future.
2. Avoid strong light
There is a significant difference between A3 sublimation paper and ordinary paper. It is difficult for ordinary paper to have a big impact when exposed to strong light, but if A3 sublimation paper is exposed to the sun, cracks will appear on the surface, and the material coating will fall off after a long time. . The white A3 sublimation paper is not too serious and can be used reluctantly, but the situation shown by the colored A3 sublimation paper will be especially obvious.
3. Keep away from fire
Under high-temperature conditions, the pattern on the A3 sublimation paper will melt. Because the pattern's adhesion is mainly maintained by ink, it must be kept away from the fire source, and try not to store it in a room with a high temperature. When not in use, it can be sealed and stored in a cloth bag at a higher level. Do not directly contact the space to maintain the use effect of A3 sublimation paper.
The purchase of regular A3 sublimation paper can have a good use effect, but it needs to be properly preserved after purchase to maintain the original condition. Otherwise, even if the quality of A3 sublimation paper is not good, it will slowly go by overtime. The quality deteriorates, and even serious peeling of the coating may occur. It should be stored in a dry but low-temperature room without direct contact with the air.